Üretici Web Sayfası

Altera Cyclone V GX Starter Kit

Bu ürün sipariş üzerine ithal edilmektedir.

UYARI!Bu ürünler tasarım amaçlı olup sadece DOA Dead-on-arrival zamanında garantisi bulunmaktadır.
Ürün Kodu: TGM.TER.CYCLONE V GX | İlk İthalat Dönemi: Kasım 2013 | Garanti Süresi: 0 Ay

Bu ürün sadece özel sipariş üzerine getirilmektedir. Siparişleriniz için satis@cizgi.com.tr adresine mail atabilirsiniz.

cyclone_v_gx_starter_kit.jpgCyclone V GX Starter Kit

The Cyclone V Starter Kit presents a robust hardware design platform built around the Altera Cyclone V GX FPGA, which is optimized for the lowest cost and power requirement for transceiver applications with industry-leading programmable logic for ultimate design flexibility. With Cyclone V FPGAs, you can get the power, cost, and performance levels you need for high-volume applications including protocol bridging, motor control drives, broadcast video converter and capture cards, and handheld devices. The Cyclone V Starter Kit development board includes hardware such as Arduino Header, on-board USB Blaster, audio and video capabilities and much more. In addition, an on-board HSMC connector with high-speed transceivers allows for an even greater array of hardware setups. By leveraging all of these capabilities, the Cyclone V Starter Kit is the perfect solution for showcasing, evaluating, and prototyping the true potential of the Altera Cyclone V GX FPGA.


FPGA Device

  • Cyclone V GX 5CGXFC5C6F27C7N Device
  • 77K Programmable Logic Elements
  • 4884 Kbits embedded memory
  • Six Fractional PLLs
  • Two Hard Memory Controllers
  • Six 3.125G Transceivers

Configuration and Debug

  • Quad Serial Configuration device – EPCQ256 on FPGA
  • On-Board USB Blaster (Normal Type-B USB connector)
  • JTAG and AS mode configuration supported

Memory Device

  • 4Gb LPDDR2 x32 bits data bus
  • 4Mb SRAM x16 bits data bus


  • UART to USB

Expansion I/O

  • HSMC x 1, including 4-lanes 3.125G transceiver
  • 2x20 GPIO Header
  • Arduino header, including analog pins
  • SMA x 4 (DNI), one-lane 3.125G transceiver


  • HDMI TX, compatible with DVI v1.0 and HDCP v1.4


  • 24-bit CODEC, Line-in, line-out, and microphone-in jacks

Switches, Buttons, LED, and 7-Segments

  • 18 LEDs
  • 10 Slide Switches
  • 4 Debounced Push Buttons
  • 1 CPU reset Push Buttons
  • Four 7-Segments

Micro SD Card Socket

  • Provides SPI and 4-bit SD mode for SD Card access


  • 12V DC input
Kit Contents
  • Cyclone V GX Starter Kit board
  • Cyclone V GX Starter Kit Quick
  • Start Guide
  • Type A to B USB Cable
  • Power DC Adapter (12V)
Product Page



Lütfen bekleyiniz!